This Wiko Selfy 4G Firmware, Stock ROM file tin survive used amongst whatsoever service tools capable of Flashing Stock ROM file on Wiko Android devices.Stock firmware are by as well as large needed to either upgrade your Wiko Selfy 4G, downgrade it or, to exactly flash the cry to right surely software issues or malfunctions on the phone. Here on this page I accept contained the download link for the consummate Wiko Selfy 4G, Stock ROM file which tin survive used to flash manufactory OS dorsum to your Wiko Selfy 4G.
How to Download Stock Firmware as well as Flash Wiko Selfy 4G amongst the Stock ROM
1. Download SP Flash Tool from here as well as install it on your PC. If you lot don't accept MTK Android drivers installed on your PC yet, you lot must install it too. Download VCOM Drivers here2. Download your Wiko Selfy 4G firmware, Stock ROM File from here.
3. Open the SP Flash Tool you lot downloaded from the link above. It is compressed inwards a goose egg file, exactly extract it onto a folder on your PC, opened upwards the folder to locate flash_tool.exe application as well as then; double-click it to luncheon the program.
4. Go to the folder where you lot downloaded the Wiko Selfy 4G Stock ROM as well as opened upwards it. It is compressed inwards a ZIP File, exactly decompress/unzip it onto a folder on your PC.
5. On SP Flash Tool, pick out Scatter Loading. Influenza A virus subtype H5N1 window should open. Using the browse button, navigate to the folder where you lot unzipped the Wiko Selfy 4G stock ROM as well as and then pick out "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.
6. Once selected, SP Flash Tool volition charge all the partitions inwards the Wiko Selfy 4G stock ROM you lot downloaded. From the list, mark all the partitions EXCEPT these 3 (3): Preloader, UserData as well as CACHE.
7. Now, pick out Download on SP Flash Tool.
8. Put off your Wiko Selfy 4G or take battery from it as well as re-insert the battery again. Connect your Wiko Selfy 4G Mobile Phone to the PC as well as and then tap the Power push clit once.
9. For few seconds, your Windows PC volition install the necessary drivers for the flashing functioning as well as then, the flashing functioning volition commence promptly.
10. When the flashing functioning completes, SP Flash Tool volition display a light-green PASS circle. You may as well as then disconnect your cry from the PC.
CONGRATULATIONS! You accept successfully flashed your Wiko Selfy 4G to its manufactory defaults.
NOTE: if you lot run across whatsoever errors spell flashing your Wiko Selfy 4G using SP Flash Tools, consider here: Solutions to All SP Flash Tools Errors: Practical Guides
For Graphical Illustrations on how to flash Wiko android devices, consider here: How to Flash Wiko Android Device: Step yesteryear Step amongst Pictures
Also Read:
- How to Install Complete MTK Android Drivers [VCOM Drivers] Driver On your PC
- How to Flash MTK Android Devices Using Miracle Box
- All iTel Android Stock Firmware, PAC File Download
