This Wiko Robby Firmware, Stock ROM file tin endure used amongst whatever service tools capable of Flashing Stock ROM file on Wiko Android devices.Stock firmware are to a greater extent than frequently than non needed to either upgrade your Wiko Robby, downgrade it or, to only flash the telephone to right sure enough software issues or malfunctions on the phone. Here on this page I convey contained the download link for the consummate Wiko Robby, Stock ROM file which tin endure used to flash mill OS dorsum to your Wiko Robby.
How to Download Stock Firmware together with Flash Wiko Robby amongst the Stock ROM
1. Download SP Flash Tool from here together with install it on your PC. If you lot don't convey MTK Android drivers installed on your PC yet, you lot must install it too. Download VCOM Drivers here2. Download your Wiko Robby firmware, Stock ROM File from here.
3. Open the SP Flash Tool you lot downloaded from the link above. It is compressed inwards a zilch file, only extract it onto a folder on your PC, opened upward the folder to locate flash_tool.exe application together with then; double-click it to luncheon the program.
4. Go to the folder where you lot downloaded the Wiko Robby Stock ROM together with opened upward it. It is compressed inwards a ZIP File, only decompress/unzip it onto a folder on your PC.
5. On SP Flash Tool, guide Scatter Loading. Influenza A virus subtype H5N1 window should open. Using the browse button, navigate to the folder where you lot unzipped the Wiko Robby stock ROM together with hence guide "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.
6. Once selected, SP Flash Tool volition charge all the partitions inwards the Wiko Robby stock ROM you lot downloaded. From the list, mark all the partitions EXCEPT these 3 (3): Preloader, UserData together with CACHE.
7. Now, guide Download on SP Flash Tool.
8. Put off your Wiko Robby or take away battery from it together with re-insert the battery again. Connect your Wiko Robby Mobile Phone to the PC together with hence tap the Power push clit once.
9. For few seconds, your Windows PC volition install the necessary drivers for the flashing functioning together with then, the flashing functioning volition commence promptly.
10. When the flashing functioning completes, SP Flash Tool volition display a dark-green PASS circle. You may hence disconnect your telephone from the PC.
CONGRATULATIONS! You convey successfully flashed your Wiko Robby to its mill defaults.
NOTE: if you lot run across whatever errors spell flashing your Wiko Robby using SP Flash Tools, reckon here: Solutions to All SP Flash Tools Errors: Practical Guides
For Graphical Illustrations on how to flash Wiko android devices, reckon here: How to Flash Wiko Android Device: Step past times Step amongst Pictures
Also Read:
- How to Install Complete MTK Android Drivers [VCOM Drivers] Driver On your PC
- How to Flash MTK Android Devices Using Miracle Box
- All iTel Android Stock Firmware, PAC File Download
