This Wiko Pulp 4G Firmware, Stock ROM file tin laissez passer on the sack hold out used alongside whatever service tools capable of Flashing Stock ROM file on Wiko Android devices.Stock firmware are to a greater extent than frequently than non needed to either upgrade your Wiko Pulp 4G, downgrade it or, to precisely flash the band to right sure as shooting software issues or malfunctions on the phone. Here on this page I convey contained the download link for the consummate Wiko Pulp 4G, Stock ROM file which tin laissez passer on the sack hold out used to flash manufactory OS dorsum to your Wiko Pulp 4G.
How to Download Stock Firmware too Flash Wiko Pulp 4G alongside the Stock ROM
1. Download SP Flash Tool from here too install it on your PC. If yous don't convey MTK Android drivers installed on your PC yet, yous must install it too. Download VCOM Drivers here2. Download your Wiko Pulp 4G firmware, Stock ROM File from here.
3. Open the SP Flash Tool yous downloaded from the link above. It is compressed inwards a null file, precisely extract it onto a folder on your PC, opened upward the folder to locate flash_tool.exe application too then; double-click it to luncheon the program.
4. Go to the folder where yous downloaded the Wiko Pulp 4G Stock ROM too opened upward it. It is compressed inwards a ZIP File, precisely decompress/unzip it onto a folder on your PC.
5. On SP Flash Tool, choose Scatter Loading. H5N1 window should open. Using the browse button, navigate to the folder where yous unzipped the Wiko Pulp 4G stock ROM too and then choose "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.
6. Once selected, SP Flash Tool volition charge all the partitions inwards the Wiko Pulp 4G stock ROM yous downloaded. From the list, mark all the partitions EXCEPT these 3 (3): Preloader, UserData too CACHE.
7. Now, choose Download on SP Flash Tool.
8. Put off your Wiko Pulp 4G or take battery from it too re-insert the battery again. Connect your Wiko Pulp 4G Mobile Phone to the PC too and then tap the Power push clit once.
9. For few seconds, your Windows PC volition install the necessary drivers for the flashing performance too then, the flashing performance volition commence promptly.
10. When the flashing performance completes, SP Flash Tool volition display a greenish PASS circle. You may too then disconnect your band from the PC.
CONGRATULATIONS! You convey successfully flashed your Wiko Pulp 4G to its manufactory defaults.
NOTE: if yous run into whatever errors piece flashing your Wiko Pulp 4G using SP Flash Tools, reckon here: Solutions to All SP Flash Tools Errors: Practical Guides
For Graphical Illustrations on how to flash Wiko android devices, reckon here: How to Flash Wiko Android Device: Step past times Step alongside Pictures
Also Read:
- How to Install Complete MTK Android Drivers [VCOM Drivers] Driver On your PC
- How to Flash MTK Android Devices Using Miracle Box
- All iTel Android Stock Firmware, PAC File Download
