This Wiko Pulp 3G Firmware, Stock ROM file tin hold upwards used alongside whatever service tools capable of Flashing Stock ROM file on Wiko Android devices.Stock firmware are by as well as large needed to either upgrade your Wiko Pulp 3G, downgrade it or, to exactly flash the scream to right certainly software issues or malfunctions on the phone. Here on this page I accept contained the download link for the consummate Wiko Pulp 3G, Stock ROM file which tin hold upwards used to flash mill OS dorsum to your Wiko Pulp 3G.
How to Download Stock Firmware as well as Flash Wiko Pulp 3G alongside the Stock ROM
1. Download SP Flash Tool from here as well as install it on your PC. If you lot don't accept MTK Android drivers installed on your PC yet, you lot must install it too. Download VCOM Drivers here2. Download your Wiko Pulp 3G firmware, Stock ROM File from here.
3. Open the SP Flash Tool you lot downloaded from the link above. It is compressed inwards a zero file, exactly extract it onto a folder on your PC, opened upwards the folder to locate flash_tool.exe application as well as then; double-click it to tiffin the program.
4. Go to the folder where you lot downloaded the Wiko Pulp 3G Stock ROM as well as opened upwards it. It is compressed inwards a ZIP File, exactly decompress/unzip it onto a folder on your PC.
5. On SP Flash Tool, lead Scatter Loading. H5N1 window should open. Using the browse button, navigate to the folder where you lot unzipped the Wiko Pulp 3G stock ROM as well as hence lead "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.
6. Once selected, SP Flash Tool volition charge all the partitions inwards the Wiko Pulp 3G stock ROM you lot downloaded. From the list, mark all the partitions EXCEPT these 3 (3): Preloader, UserData as well as CACHE.
7. Now, lead Download on SP Flash Tool.
8. Put off your Wiko Pulp 3G or withdraw battery from it as well as re-insert the battery again. Connect your Wiko Pulp 3G Mobile Phone to the PC as well as hence tap the Power push once.
9. For few seconds, your Windows PC volition install the necessary drivers for the flashing functioning as well as then, the flashing functioning volition commence promptly.
10. When the flashing functioning completes, SP Flash Tool volition display a dark-green PASS circle. You may hence disconnect your scream from the PC.
CONGRATULATIONS! You accept successfully flashed your Wiko Pulp 3G to its mill defaults.
NOTE: if you lot reckon whatever errors piece flashing your Wiko Pulp 3G using SP Flash Tools, reckon here: Solutions to All SP Flash Tools Errors: Practical Guides
For Graphical Illustrations on how to flash Wiko android devices, reckon here: How to Flash Wiko Android Device: Step past times Step alongside Pictures
Also Read:
- How to Install Complete MTK Android Drivers [VCOM Drivers] Driver On your PC
- How to Flash MTK Android Devices Using Miracle Box
- All iTel Android Stock Firmware, PAC File Download
