Wiko Highway Signs V8 [Android 4.4] Stock Firmware, Stock Rom Download

This Wiko Highway Signs v8 [4.4.2 ALPS KK1 MP1 V2.10] Firmware, Stock ROM file tin travel used alongside whatsoever service tools capable of Flashing Stock ROM file on Wiko Android devices.

Stock firmware are to a greater extent than oft than non needed to either upgrade your Wiko Highway Signs v8, downgrade it or, to only flash the telephone to right certainly software issues or malfunctions on the phone. Here on this page I accept contained the download link for the consummate Wiko Highway Signs v8, Stock ROM file which tin travel used to flash mill OS dorsum to your Wiko Highway Signs v8.

How to Download Stock Firmware too Flash Wiko Highway Signs v8 alongside the Stock ROM

1. Download SP Flash Tool from here too install it on your PC. If you lot don't accept MTK Android drivers installed on your PC yet, you lot must install it too. Download VCOM Drivers here

2. Download your Wiko Highway Signs v8 firmware, Stock ROM File from here.

3. Open the SP Flash Tool you lot downloaded from the link above. It is compressed inward a zero file, only extract it onto a folder on your PC, opened upwards the folder to locate flash_tool.exe application too then; double-click it to luncheon the program.

4. Go to the folder where you lot downloaded the Wiko Highway Signs v8 Stock ROM too opened upwards it. It is compressed inward a ZIP File, only decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, pick out Scatter Loading. Influenza A virus subtype H5N1 window should open. Using the browse button, navigate to the folder where you lot unzipped the Wiko Highway Signs v8 stock ROM too and then pick out "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool volition charge all the partitions inward the Wiko Highway Signs v8 stock ROM you lot downloaded. From the list, mark all the partitions EXCEPT these iii (3): Preloader, UserData too CACHE.

7. Now, pick out Download on SP Flash Tool.

8. Put off your Wiko Highway Signs v8 or withdraw battery from it too re-insert the battery again. Connect your Wiko Highway Signs v8 Mobile Phone to the PC too and then tap the Power push once.

9. For few seconds, your Windows PC volition install the necessary drivers for the flashing functioning too then, the flashing functioning volition commence promptly.

10. When the flashing functioning completes, SP Flash Tool volition display a greenish PASS circle. You may too then disconnect your telephone from the PC.
CONGRATULATIONS! You accept successfully flashed your Wiko Highway Signs v8 to its mill defaults.
NOTE: if you lot run across whatsoever errors piece flashing your Wiko Highway Signs v8 using SP Flash Tools, consider here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Wiko android devices, consider here: How to Flash Wiko Android Device: Step yesteryear Step alongside Pictures

Also Read:

• How to Install Complete MTK Android Drivers [VCOM Drivers] Driver On your PC
• How to Flash MTK Android Devices Using Miracle Box
• All iTel Android Stock Firmware, PAC File Download

Video Tutorial: How to Flash All MTK Android Devices Including Wiko Highway Signs v8