This Wiko Fever Firmware, Stock ROM file tin strength out last used amongst whatever service tools capable of Flashing Stock ROM file on Wiko Android devices.Stock firmware are to a greater extent than oftentimes than non needed to either upgrade your Wiko Fever, downgrade it or, to only flash the telephone to right sure enough software issues or malfunctions on the phone. Here on this page I convey contained the download link for the consummate Wiko Fever, Stock ROM file which tin strength out last used to flash manufacturing flora OS dorsum to your Wiko Fever.
How to Download Stock Firmware together with Flash Wiko Fever amongst the Stock ROM
1. Download SP Flash Tool from here together with install it on your PC. If you lot don't convey MTK Android drivers installed on your PC yet, you lot must install it too. Download VCOM Drivers here2. Download your Wiko Fever firmware, Stock ROM File from here.
3. Open the SP Flash Tool you lot downloaded from the link above. It is compressed inwards a naught file, only extract it onto a folder on your PC, opened upward the folder to locate flash_tool.exe application together with then; double-click it to tiffin the program.
4. Go to the folder where you lot downloaded the Wiko Fever Stock ROM together with opened upward it. It is compressed inwards a ZIP File, only decompress/unzip it onto a folder on your PC.
5. On SP Flash Tool, guide Scatter Loading. Influenza A virus subtype H5N1 window should open. Using the browse button, navigate to the folder where you lot unzipped the Wiko Fever stock ROM together with hence guide "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.
6. Once selected, SP Flash Tool volition charge all the partitions inwards the Wiko Fever stock ROM you lot downloaded. From the list, mark all the partitions EXCEPT these iii (3): Preloader, UserData together with CACHE.
7. Now, guide Download on SP Flash Tool.
8. Put off your Wiko Fever or take away battery from it together with re-insert the battery again. Connect your Wiko Fever Mobile Phone to the PC together with hence tap the Power push once.
9. For few seconds, your Windows PC volition install the necessary drivers for the flashing performance together with then, the flashing performance volition commence promptly.
10. When the flashing performance completes, SP Flash Tool volition display a light-green PASS circle. You may hence disconnect your telephone from the PC.
CONGRATULATIONS! You convey successfully flashed your Wiko Fever to its manufacturing flora defaults.
NOTE: if you lot come across whatever errors piece flashing your Wiko Fever using SP Flash Tools, reckon here: Solutions to All SP Flash Tools Errors: Practical Guides
For Graphical Illustrations on how to flash Wiko android devices, reckon here: How to Flash Wiko Android Device: Step past times Step amongst Pictures
Also Read:
- How to Install Complete MTK Android Drivers [VCOM Drivers] Driver On your PC
- How to Flash MTK Android Devices Using Miracle Box
- All iTel Android Stock Firmware, PAC File Download
