Gionee P3 [0401 T6236] Stock Firmware, Stock Rom Download

This Gionee P3 [0401 T6236] Firmware, Stock ROM file tin laissez passer on the axe last used alongside whatsoever service tools capable of Flashing Stock ROM file on Gionee Android devices.

Stock firmware are to a greater extent than ofttimes than non needed to either upgrade your Gionee P3 [0401 T6236] or flash the band to right for certain software issues or malfunctions on the phone. Here on this page I accept contained the download link for the consummate Gionee P3 [0401 T6236], Stock ROM file which tin laissez passer on the axe last used to flash manufactory OS dorsum to your Gionee P3 [0401 T6236].

How to Download Stock Firmware as well as Flash Gionee P3 [0401 T6236] alongside the Stock ROM

1. Download SP Flash Tool from here as well as install it on your PC. If yous don't accept MTK Android drivers installed on your PC yet, yous must install it too. Download VCOM Drivers here

2. Download your Gionee P3 [0401 T6236], firmware, Stock ROM File from here.

3. Open the SP Flash Tool yous downloaded from the link above. It is compressed inwards a zero file, but extract it onto a folder on your PC, opened upwards the folder to locate flash_tool.exe application as well as then; double-click it to tiffin the program.

4. Go to the folder where yous downloaded the Gionee P3 [0401 T6236] Stock ROM as well as opened upwards it. It is compressed inwards a ZIP File, but decompress/unzip it onto a folder on your PC.

5. On SP Flash Tool, direct Scatter Loading. H5N1 window should open. Using the browse button, navigate to the folder where yous unzipped the Gionee P3 [0401 T6236] stock ROM as well as hence direct "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.

6. Once selected, SP Flash Tool volition charge all the partitions inwards the Gionee P3 [0401 T6236] stock ROM yous downloaded. From the list, mark all the partitions EXCEPT these 3 (3): Preloader, UserData as well as CACHE.

7. Now, direct Download on SP Flash Tool.

8. Put off your Gionee P3 [0401 T6236] or take away battery from it as well as re-insert the battery again. Connect your Gionee P3 [0401 T6236] Mobile Phone to the PC as well as hence tap the Power push once.

9. For few seconds, your Windows PC volition install the necessary drivers for the flashing functioning as well as then, the flashing functioning volition commence promptly.

10. When the flashing functioning completes, SP Flash Tool volition display a light-green PASS circle. You may hence disconnect your band from the PC.
CONGRATULATIONS! You accept successfully flashed your Gionee P3 [0401 T6236] to its manufactory defaults.
NOTE: if yous run into whatsoever errors acre flashing your Gionee P3 [0401 T6236] using SP Flash Tools, consider here: Solutions to All SP Flash Tools Errors: Practical Guides

For Graphical Illustrations on how to flash Gionee android devices, consider here: How to Flash Gionee Android Device: Step past times Step alongside Pictures

Also Read:

• How to Install Complete VCOM Driver for MTK Android Devices On your PC
• How to Flash MTK Android Devices Using Miracle Box
• All iTel Android Stock ROM Stock ROM File Download

Video Tutorial: How to Flash All MTK Android Devices Including Gionee P3 [0401 T6236]