You volition normally necessitate to know the detailed information near a particular android device y'all desire to flash earlier y'all hold to flashing that device. This necessary hence that y'all may live on able to create upwardly one's hear the stock firmware that is suitable for flashing that phone. If the shout withal boots to android as well as could access the settings, y'all would non convey required whatsoever software to create the piece of employment for y'all but, inward this case, nosotros are refering to dead Spreadtrum as well as MTK android devices.
Why Do y'all Need to Check the Info Before Flashing Stock Firmware?
1. To avoid complicating the issues alongside the phone. Some MTK as well as SPD phones may never live on recovered if a incorrect firmware is flashed on them.2. Knowing/Reading the device information helps brand your piece of employment faster.
3. To avoid the unexpected circumstances.
4. To preclude after-flash malfunctions. Some Spreadtrum devices especially, iTel affect pad malfunctions later on flashing. Wrong firmware is to a greater extent than ofttimes than non the movement of it.
5. Work similar a pro!
Reading Dead Spreadtrum/MTK Android Device Info alongside Miracle Box
1. Download Miracle Box from here. Skip this pace if y'all already convey Miracle Box setup on your PC.2. Install Miracle Box as well as then, launch it.
3. Depending on the device chipset, i.e SPD or MTK, choose/select the appropriate tab.
4. Under either the SPD Tab or MTK Tab, select Readinfo.
5. Click the Start push as well as connect your shout to the PC via a compatible USB Cable.
6. Press as well as Hold the phone's kick substitution spell the shout is connected to the PC. NOTE: about MTK device does non require pressing/holding the kick key.
7. Wait spell Miracle Box detects the device, reads its information as well as then; display it.
From the information dispalyed past times Miracle Box, y'all should run across everything y'all necessitate to know near the device.
