This GFive_President_G10_Life_4.4.2_ALPS.KK1.MP1_V2.10 Firmware, Stock ROM file tin survive used amongst whatsoever service tools capable of Flashing Stock ROM file on GFive Android devices.Stock firmware are by together with large needed to either upgrade your GFive President G10, downgrade it or, to precisely flash the band to right certainly software issues or malfunctions on the phone. Here on this page I accept contained the download link for the consummate GFive President G10, Stock ROM file which tin survive used to flash manufacturing flora OS dorsum to your GFive President G10.
How to Download Stock Firmware together with Flash GFive President G10 amongst the Stock ROM
1. Download SP Flash Tool from here together with install it on your PC. If yous don't accept MTK Android drivers installed on your PC yet, yous must install it too. Download VCOM Drivers here2. Download your GFive President G10 firmware, Stock ROM File from here.
3. Open the SP Flash Tool yous downloaded from the link above. It is compressed inwards a nada file, precisely extract it onto a folder on your PC, opened upwardly the folder to locate flash_tool.exe application together with then; double-click it to tiffin the program.
4. Go to the folder where yous downloaded the GFive President G10 Stock ROM together with opened upwardly it. It is compressed inwards a ZIP File, precisely decompress/unzip it onto a folder on your PC.
5. On SP Flash Tool, conduct Scatter Loading. H5N1 window should open. Using the browse button, navigate to the folder where yous unzipped the GFive President G10 stock ROM together with hence conduct "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.
6. Once selected, SP Flash Tool volition charge all the partitions inwards the GFive President G10 stock ROM yous downloaded. From the list, mark all the partitions EXCEPT these 3 (3): Preloader, UserData together with CACHE.
7. Now, conduct Download on SP Flash Tool.
8. Put off your GFive President G10 or take battery from it together with re-insert the battery again. Connect your GFive President G10 Mobile Phone to the PC together with hence tap the Power push clit once.
9. For few seconds, your Windows PC volition install the necessary drivers for the flashing functioning together with then, the flashing functioning volition commence promptly.
10. When the flashing functioning completes, SP Flash Tool volition display a dark-green PASS circle. You may hence disconnect your band from the PC.
CONGRATULATIONS! You accept successfully flashed your GFive President G10 to its manufacturing flora defaults.
NOTE: if yous come across whatsoever errors spell flashing your GFive President G10 using SP Flash Tools, regard here: Solutions to All SP Flash Tools Errors: Practical Guides
For Graphical Illustrations on how to flash GFive android devices, regard here: How to Flash GFive Android Device: Step past times Step amongst Pictures
Also Read:
- How to Install Complete MTK Android Drivers [VCOM Drivers] Driver On your PC
- How to Flash MTK Android Devices Using Miracle Box
- All iTel Android Stock Firmware, PAC File Download
