This GFive_President_A97_4.4.2_ALPS.KK1.MP7.V1 Firmware, Stock ROM file tin survive used alongside whatsoever service tools capable of Flashing Stock ROM file on GFive Android devices.Stock firmware are to a greater extent than ofttimes than non needed to either upgrade your GFive President A97, downgrade it or, to but flash the telephone to right surely software issues or malfunctions on the phone. Here on this page I bring contained the download link for the consummate GFive President A97, Stock ROM file which tin survive used to flash mill OS dorsum to your GFive President A97.
How to Download Stock Firmware as well as Flash GFive President A97 alongside the Stock ROM
1. Download SP Flash Tool from here as well as install it on your PC. If yous don't bring MTK Android drivers installed on your PC yet, yous must install it too. Download VCOM Drivers here2. Download your GFive President A97 firmware, Stock ROM File from here.
3. Open the SP Flash Tool yous downloaded from the link above. It is compressed inwards a zilch file, but extract it onto a folder on your PC, opened upward the folder to locate flash_tool.exe application as well as then; double-click it to luncheon the program.
4. Go to the folder where yous downloaded the GFive President A97 Stock ROM as well as opened upward it. It is compressed inwards a ZIP File, but decompress/unzip it onto a folder on your PC.
5. On SP Flash Tool, direct Scatter Loading. Influenza A virus subtype H5N1 window should open. Using the browse button, navigate to the folder where yous unzipped the GFive President A97 stock ROM as well as hence direct "MTXXXX-ANDROID-SCATTER", from there. Remember: "xxxx" refers to the MTK version of your phone.
6. Once selected, SP Flash Tool volition charge all the partitions inwards the GFive President A97 stock ROM yous downloaded. From the list, mark all the partitions EXCEPT these 3 (3): Preloader, UserData as well as CACHE.
7. Now, direct Download on SP Flash Tool.
8. Put off your GFive President A97 or withdraw battery from it as well as re-insert the battery again. Connect your GFive President A97 Mobile Phone to the PC as well as hence tap the Power push clit once.
9. For few seconds, your Windows PC volition install the necessary drivers for the flashing performance as well as then, the flashing performance volition commence promptly.
10. When the flashing performance completes, SP Flash Tool volition display a greenish PASS circle. You may hence disconnect your telephone from the PC.
CONGRATULATIONS! You bring successfully flashed your GFive President A97 to its mill defaults.
NOTE: if yous run into whatsoever errors piece flashing your GFive President A97 using SP Flash Tools, regard here: Solutions to All SP Flash Tools Errors: Practical Guides
For Graphical Illustrations on how to flash GFive android devices, regard here: How to Flash GFive Android Device: Step past times Step alongside Pictures
Also Read:
- How to Install Complete MTK Android Drivers [VCOM Drivers] Driver On your PC
- How to Flash MTK Android Devices Using Miracle Box
- All iTel Android Stock Firmware, PAC File Download
