This tutorial provides solution to Infinix Note 2 x600 totally dead due to incorrect firmware DLoad or flashing.
As you lot may choose known that Infinix Note 2 x600 has close three or four unlike variants as well as of which each of them uses unlike firmware.
So, inwards the example that your Infinix Note 2 x600 needs to hold out flashed as well as you lot flash it using a incorrect firmware, the device becomes dead, non booting as well as SP Flash or PC volition non hold out able to notice it anymore.
So, if you're inwards a province of affairs such every bit this, hither is what to produce to convey your dead Infinix Note 2 x600 dorsum to live.
Caution:
Do it at your ain risk, I'm non responsible for whatsoever farther bricks or damages you lot may incurred.
How to Bring Dead Infinix Note 2 x600 Back to Live
If your Infinix Note 2 x600 becomes dead due to incorrect firmware Dload or flashing, hither is the pace yesteryear pace direct to reflash it as well as convey it dorsum to live.
Requirements:
- Mobile Phone Hardware Repair Skill
- The Right Firmware for your telephone -you tin plough over the sack produce this yesteryear observing the 532 or 533 board
You may download the appropriate firmware below here:
- Download Note 2 X 600 H 532 A1 L 20151214 firmware here
- Download Note 2 X 600 H 533 A1 L firmware here
- Download Note 2 X 600 H 533 B1 L 20160120 here
NOTE: you lot may banking company tally for the device exact board publish on the board. Observe the pictures contained carefully.
Needed Tools:
- Download Infinix drivers as well as xflash tools hither : Xflash Tools as well as Drivers
How to Flash Dead Infinix Note 2 x600 Back to Live:
1. Install the drivers
2. Identify your board publish (can hold out seen on the board).
3. Download the correct firmware for the device. Links are above.
4. Lunch Xflash tool as well as charge the scatter file then, click Start.
5. Connect the socket every bit seen inwards the motion-picture demo below as well as afterwards that, connect the usb cable.
NOTE: the PC may non notice the telephone at this point.
6. Make a jumper betwixt the ground as well as the force boot pinout.
NOTE: The Jumper connection should hold out merely 1 touch. Do Not continue them connected
7. Once that's done, you lot should hither a connection audio from your PC as well as XFlash Tool should right away stimulate to flash the device.
Now, you lot alone choose to expression until the flashing operations are completed then, disconnect the telephone from the PC, twosome your telephone as well as plough it on.
Credit to Hovatek for the pictures.